| |
|
| |
|
|
|
|
|
| |
|
New Distribition Agreement with T3 Innovation
|
24/01/2012 |
Faygate Feb 2012 Psiber Data Limited is pleased to announce a new distribution agreement with US test and measurement manufacturer T3 Innovation Inc.The agreement with T3 Innovation offers Psiber Data and our channel partners a new range of state of the art telecom and datacom handheld test instruments which compliment the current Psiber Data product line. T3 Innovation will benefit from access to our European network of established channel partners. In 2012 T3 Innovation will launch new products that will re-invent entirely new categories in handheld test equipment for the Cable/Telecommunications, Datacom/Networking and Electrical Design and Maintenance markets. Better designs, better technology and better value across the board. The first of these products now available from Psiber Data Limited include the new Snap Shot cable length meter / TDR and the new Coax Clarifier |
| |
| |
|
| |
|
Psiber Announce WireXpert - 40G cable certifier
|
21/04/2011 |
|
Faygate, March 31, 2011 – Cable test and certification for all copper data networks from category 5 to 7a , for all wiring classes up to class FA - a mission dedicated to Psiber Data’s new WireXpert. The instrument supports the current national and international standards such as ISO / IEC 11801, EN 50173 and EIA / TIA 568 and is ready for future standards to come due to its wide frequency range of up to 1,600 MHz.
Davy Edgar – Managing Director (UK Operations) stated “Unlike traditional cable testers employing a main and a remote device, WireXpert uses two identical basic units. This greatly simplifies the operation, thus enhancing productivity: A single installer, contractor or network managers can fully operate the instruments from both sides of a cable if required,” The dual end control effectively reduces walking times, distances and consequently the certification effort, thus improving productivity.
For full article please click on the link above
|
| |
| |
|
| |
|
Psiber Announces New WiFi Planning Tool
|
20/03/2008 |
| 17-10-07
Comprehensive 3 Dimensional Software Simulator Package Supports Professional Planning of WiFi Networks
Opening a new dimension in wireless LAN design for IEEE 802.11 a/b/g/h WiFi networks
San Diego, London, Milano, Munich September 10, 2007 – Psiber Data Limited, today announced the launch of a cost effective, truly 3 dimensional WiFi planning software, allowing network professionals to accurately lay out optimal network coverage in even the most complex building environments with multi-level floor plans. The “RF3D WifiPlanner“ permits the cost effective and application specific design from simple to most complex wireless networks, featuring a truly 3-dimensional computation of the local network coverage in buildings, which - for the first time - recognizes interferences from access points on other floors. The fast 3D computation engine allows interactive placement and optimization of access points. Saving the need to install one access point already pays for the cost of the product.
Davy Edgar , Managing Director of Psiber Data Limited remarked: “The number of wireless networks in professional applications is steadily increasing. Our research amongst many users clearly showed, that more than 50% of these networks already employ more than 10 access points, making efficient and professional planning indispensable. Up until today, the time- and cost-effective planning of robust, highly available networks – especially in multi-storey buildings – proved extremely difficult.”
The “RF3D WifiPlanner” software supports all IEEE 802.11 a/b/g/h networks and is independent of component manufacturers. The design of a wireless network is performed in three steps: Import the floor plans of single or multi level buildings in JPG, PNG and BMP formats, rotate and scale the plans so that all floors line up properly. Then use the built-in libraries or custom design walls and floors to precisely match the buiding’s RF characteristics. Finally place access points including antenna types from a predefined open library, which can be easily supplemented by the user. The 3D computation engine immediately visualizes the resulting field strength, allowing the interactive optimization of numbers, locations and configurations of individual access points before even installing a single one.
Besides field strength, further operating parameters of the wireless network can be visualized at every location of the floor plan: Interferences, signal to noise ratios, resulting data rates up as well as failure simulations, which show the remaining radio coverage in case the strongest or 2nd strongest access points fail at a particular location. These screens present a meaningful visualization and documentation of the WiFi network under plan which – printed as a report – will serve as a basis for quotations for service providers as well as a work instruction for installers.
Psiber Data’s “RF3D WifiPlanner“ is a cost effective 3 dimensional WiFi simulation and modelling tool, which enables manufacturer independent planning of wireless networks in multi storey buildings, suitable for the WiFi novice as well as for the skilled planner and service provider. The software is available in two versions at a recommended retail price of € 295 for the RF3D WifiPlanner Lite, targeted at the semiprofessional (i.e. projects up to 10 access points and 5 floors), and € 595 for the unlimited version of RF3D WifiPlanner.
The Company:
Psiber Data Limited
Psiber Data Systems. designs, manufactures and markets worldwide test tools for LAN installers, service providers, IT technicians and managers. The company also distributes a wide range of third party products from Agilent Technologies, JDSU, Optical Wavelength Laboratories and BI Communications, designed to meet the needs of the IT professional.
For further information contact Davy Edgar, Psiber Data Limited, Unit 14 Newhouse Business Centre, Old Crawley Road, Faygate West Sussex RH12 4RU, davy@psiber-data.co.uk
|
| |
| |
|
| |
|
New PoE Link Tester
|
20/03/2008 |
| 02-05-07
Psiber Data Systems Announces First Low Cost PoE Tester.
(Faygate, West Sussex, February 3, 2006 ) - Psiber Data Systems® , a leader in network testing, announces the release the LanMaster 35 Power Link Tester model LM35.
The LM35 represents a new class of tester devoted to identifying PoE and VoiP application readiness as well as traditional 10/100/1000 link signals, TDR, and tone functions. No other tester in it's class will identify PoE and it's component voltages or classes.
Psiber Data Systems Inc. designs, manufactures and markets worldwide test tools for LAN installers, service providers, IT technicians and managers.
For further information contact Davy Edgar, Psiber Data Limited, Unit 14 Newhouse Business Centre, Old Crawley Road, Faygate West Sussex RH12 4RU, davy@psiber-data.co.uk
|
| |
| |
|
| |
|
 |
|
|
|
|
|
Psiber On Twitter
